The best thing about Verathane polyshades is that you only require one coat to achieve desired color. It is best in the interiors on surfaces such as furniture and door but can work on any type of wood. To achieve the desired color shade, two coats of the polyshades are required.

It is suitable for hardwood floors with high traffic because of its scuff-resistant feature. This Minwax Fast-Drying Polyurethane is easy to use and makes wood easy to be cared for as it offers maximum protection against an array of potential damages. Upon application, this polyurethane dries very fast and is assured to bring long-lasting beauty on different wood surfaces.

Hardwood Cleaners, Felt Pads, Doggie Socks, Etc

Each layer must be left to dry completely before another can be applied. You can use heat or increased airflow in order to speed up the drying process between coats. Remember that oil-based polyurethanes will take longer to dry than those with a water base. There are many various polyurethane sprays available on the market, which can turn the act of choosing a product into an overwhelming one. We have selected three of the best polyurethane spray products available from which you can choose the best option for your particular project. Oil based finishes are softer, so they don’t scratch as easily, but they dent more readily.

The consistency of this varnish is also thinner and more liquid – meaning that more coats are required. When working with water-based polyurethane, four or five coats is probably best. It doesn’t matter how many coats of polyurethane you do choose to apply, the job becomes faster and easier.


It takes very long to dry and the oil based poly tends to show a yellowish layer when used on light colored surfaces. Water based poly dries more quickly than the oil based poly. Polyurethane is scratch proof as it penetrates deep into the wood and durable.

It gives durable beauty and protects any interior wooden surface. It is considered one of the most durable coatings for the protection of wood. It is used ideally for wood related work, furnishing work, wooden doors/cabinets/floor. One of the big draws of water based polyurethane is that it doesn’t have much of a smell and it dries quickly. Oil-based polyurethane, on the other hand, is known for its distinct aroma. Minwax is a premium producer of wood preparation and finishing products.

Polyurethane is a substance that can either be water-based or oil-based. Oil-based polyurethane has been around for longer, and it is a form of alkyd varnish which is combined with polyurethane resin. My favorite topcoat is General Finishes High Performance Top Coat in Flat finish.

varathane vs minwax oil based polyurethane

For a reliable interior wood stain that comes in dozens of colors, you really can’t go wrong with Varathane Classic. These application methods work excellently on large horizontal areas. You must always leave yourself an escape root when applying floor finish.

Adding More Coats

A “High gloss” finish just might drive you a bit crazy if you’re thinking about it for a kitchen or dining room, and if you have pets and small children running around. Not usually where varathane vs minwax oil based polyurethane there will be heavy foot traffic, or pets. High gloss is notorious for making dust, streaks from cleaning, pet hair, water spots, scratched, dirt and dents, much more apparent.

With that said since you acknowledged that pros had issues with the low VOC finishes and that some still are having issues. How would those same issues pros had and some still have transfer over to a homeowner using the same products just once as opposed to everyday in their career as a pro? Keeping in mind as I stated the sanding job is more important to the outcome of the job then anything else. With that said home owners will not only not have access to Hummels and the like, Home owners also do not know how to run any of the machines correctly nor should they. How many times have you hit the internet seeing home owners running and edger from right to left?

How To Laminate Two Pieces Of Wood Together

Without some kind of finish to protect it from the elements, wood can become as dry and lifeless as day-old toast. Use this guide to learn more about how to choose the best type of polyurethane and apply it to furniture to bring out the beauty of wood around your house. Usually high traffic pieces like kitchen table would be better finished off with polyurethane while a white lamp in the master bedroom should be done with polycrylic.

varathane vs minwax oil based polyurethane

After your final coat, you may choose to rub out the finish with #0000 steel wool to a consistent sheen level, followed by an application of paste wax for a nice luster. After the first coat has fully dried (according to the manufacturer’s directions), lightly sand the entire surface , using 320-grit sandpaper. The polyurethane will sand easily, so be careful not to sand through the thin coat and damage the stain or wood underneath. Remove all dust with a vacuum and tack cloth before applying the second coat. As you’re finishing each fresh coat during application, check your work with a bright side-light. Crouch down so you see the light reflecting off of the surface.

Their water based line comes in as many colors as their oil based for practically endless options. Using polyurethane is very important for your wooden surfaces and furniture, so you need to make sure that you are able to apply it well. Being able to apply polyurethane yourself will save you time and money instead of having to rely on a professional. This means that you will need to consider polyurethanes that are easy to use.

At each step in this process you want to apply thin, even coats, with no drips, runs, or puddles. Clean the wood very thoroughly to remove sanding dust before each new coat of polyurethane, using a vacuum and a tack cloth. You can also use a rag moistened with mineral spirits (for an oil-based poly) or cheesecloth moistened with denatured alcohol (for a water-based poly). Oil-based polyurethane typically adds a warm amber glow to wood, particularly to lighter wood species, such as white oak, maple, or birch.

This type is easier to maintain than water-based products and it’s more durable too. Oil-based products are also more water-resistant, so soap and water spills won’t easily damage the floor. Yes, you can certainly use a foam brush to apply polyurethane to hardwood floors. You’ll appreciate that this type of brush rarely drips product on the wood flooring you’re working on. Only when you apply pressure will the polyurethane leave the foam. For best results, you can also look for wipe-on polyurethane products designed to be applied with a cloth.

Also, apply it beneath a film finish to add an amber tone and to accent figured woods such as curly maple. Wiping varnish, usually a type of polyurethane, comes premixed, but you can make your own by thinning regular varnish with mineral spirits. Oil/varnish mixes, such as Danish oil, enhance grain while laying down a thin film. Because of their oil content, oil/ varnish mixes also need to dry overnight. After he had moved his particleboard bookcases twice, he watched in amazement as one of them fell apart before his eyes.

Best Colors:

When spraying, ensure that you keep the nozzle at least 10 to 12 inches away from the surface. Although the act of spraying polyurethane proves to be more effective than that of brushing, first you will need to master your technique. We have put together some detailed directions on how to go about spraying polyurethane in order to achieve the best possible finish. The gun is customizable and adjustable to achieve the perfect spray and finish.

  • Now, my floors look nearly as shiny and new as the day when I moved in.
  • The flagship feature of this product is definitely its fast drying time.
  • The quality of workmanship matters a lot when it comes to finishing your hardwood floors but beyond that, the quality of the materials used matters more!
  • Wipe-on polyurethanes are typically used for contoured surfaces such as crown molding, where brushing is not optimal or feasible.
  • If you intend to use this outdoors, whether on the water or not, it’s a great option, as it can limit the effects of damaging road salt and other precipitation-related damages.
  • Never shake a can of polyurethane or you’ll sabotage the finish with air bubbles.
  • This wood stain is available in any natural shade you can think of, and for additional protection of the material, you may want to apply a polyurethane coat on top of it.
  • To avoid this, just use more material in a slightly thicker application.
  • Ideally you should be able to leave the surface alone at this point, but ending with a wet-sanding procedure will get you the best finish possible.
  • Oil-based polyurethane typically adds a warm amber glow to wood, particularly to lighter wood species, such as white oak, maple, or birch.